Freshers India

Engineering - Civil Enginnering

You Are Here :: Home > Civil Engineering > Railway Engineering-General Questions

25.

Due to battering action of wheels over the end of the rails, the rails get bent down and are deflected at ends. These rails are called

A.	roaring rails	B.	hogged rails
C.	corrugated rails	D.	buckled rails

26.

Fish plate is in contact with rail at

A.	web of rail	B.	fishing plane
C.	head of rail	D.	foot of rail

27.

Flangeway clearance is the distance

A.	between the adjoining faces of the running rail and the check rail near the crossing	B.	between the gauge faces of the stock rail and the tongue rail
C.	through which the tongue rail moves laterally at the toe of the switch	D.	none of the above

28.

Flat mild steel bearing plates are used

A.	for points and crossings in the lead portion	B.	with wooden sleepers at locations where creep is likely to be developed
C.	on all joints and curves	D.	on all the above

29.

For a Broad Gauge route with M+7 sleeper density, number of sleepers per rail length is

A.	18	B.	19
C.	20	D.	21

30.

For developing thinly populated areas, the correct choice of gauge is

A.	Broad Gauge	B.	Meter Gauge
C.	Narrow Gauge	D.	any of the above

« prev

Catch Us on