Engineering - Civil Enginnering
You Are Here :: Home > Civil Engineering > Concrete Technology & Design-General Questions
25. |
Diagonal tension in a beam
|
A. |
is maximum at neutral axis |
B.
|
decreases below the neutral axis and increases above the neutral axis |
C.
|
increases below the neutral axis and decreases above the neutral axis
|
D.
|
remains same
|
|
Answer: Option C
Explanation:
|
26. |
Due to circumferential action of the spiral in a spirally reinforced column
|
A. |
capacity of column is decreased |
B.
|
ductility of column reduces |
C.
|
capacity of column is decreased but ductility of column increases
|
D.
|
both the capacity of column and ductility of column increase
|
|
Answer: Option D
Explanation:
|
27. |
Due to shrinkage stresses, a simply supported beam having reinforcement only at bottom tends to
|
A. |
deflect downward |
B.
|
deflect upward |
C.
|
deflect downward or upward
|
D.
|
none of the above
|
|
Answer: Option A
Explanation:
|
28. |
During erection, the pile of length / is supported by a crane at a distance of from the driving end of pile which rests on the ground
|
A. |
0.207 / |
B.
|
0.293 / |
C.
|
0.7071
|
D.
|
0.793 /
|
|
Answer: Option C
Explanation:
|
29. |
Finer grinding of cement
|
A. |
affects only the early development of strength |
B.
|
affects only the ultimate strength |
C.
|
both (a) and (b)
|
D.
|
does not affect the strength
|
|
Answer: Option A
Explanation:
|
30. |
For a cantilever of effective depth of 0.5m, the maximum span to satisfy vertical deflection limit is
|
A. |
3.5 m |
B.
|
4 m |
C.
|
4.5 m
|
D.
|
5 m
|
|
Answer: Option A
Explanation:
|
« prev
next »